release time：  2019-10-28Click volume:  70

Zhongshan Steel Structure Shelf Early Innovative Propaganda Shelf Installation Quickly improve the shelf life . The installation shelf is a technology. Lianhe Zhongbang has more than 15 people installing the attic shelf team. Zhongshan heavy-duty shelves, Zhongshan attic shelves, Zhongshan warehouse shelves, are assembled from beams, columns, support beams and so on.

Zhongshan Steel Structure Shelves will innovate and promote shelf installation to quickly increase the shelf life. Installation of shelves is a technology. Lianhe Zhongbang has more than 15 people installed attic shelf team. Zhongshan heavy-duty shelves, Zhongshan attic shelves, and Zhongshan warehouse shelves are all assembled from beams, columns, and support beams. The main beam is installed; after the site is measured, the two ends are anchored for fine cutting, and after the actual measurement, the cutting is carried out. If the span is small, the steel is selected as much as possible, and the error is not more than 4 mm. Due to the restrictions on the construction conditions on site, the site could not enter the construction machinery and the manpower was installed to the 3.7m elevation. The above four workers and two workers on the ground are required to be bundled on a steel beam with a 3 ton gourd. It is necessary to use 3 tons of hoist 10 shifts to work with 6 workers for 5 working days. The main beam is hoisted to the elevation of the figure and the spot is first welded, then reinforced, and finally welded. 7, steel floor board installation. The two sides of the board should be lapped on the main beam of the steel keel, and do not overlap in the empty space. When laying the board, it is best to leave a 3mm expansion joint between the board and the board. Use waterproof and stretchable construction glue as the caulking agent, and use the self-tapping screws to fix it.

Zhongshan awning shelf manufacturers generally how to remove rust treatment, Lianhe Zhongbang shelves will often be rust-treated. This process is indispensable. Steel is generally used in the production of attic shelves, but if the steel used in the construction is rusted, the life of the attic shelf will be greatly shortened. It is also a challenge to personal safety. In recent years, it has been paid more and more attention. Today, Lianhe Zhongbang shelf small-frame shelves are expected to teach you some methods of derusting.

1. Pickling and rust removal of Zhongshan attic shelf manufacturers. The steel components to be coated are immersed in an acid bath, and the oil and rust on the surface of the component are removed with acid. The pickling process is also efficient, and the rust removal is relatively thorough. However, after pickling, the components must be washed with hot water or water. If residual acid is present, the rust of the components will be more severe.

2, manual descaling is the use of some relatively simple tools, such as scrapers, grinding wheels, abrasive cloth, wire brush and other tools to remove rust on steel components. This method has low working efficiency, poor working conditions, and is not completely rust-removing.

3, Zhongshan shelf sandblasting rusting It is the use of compressed air pressure, continuous use of quartz sand or iron sand impact steel surface, the surface of the steel rust, oil and other debris cleaned, revealing the nature of metal steel Descaling method. This method has high efficiency and complete rust removal, and is a relatively advanced descaling process. Zhongshan rudder shelf manufacturers above the rust removal program.

Zhongshan Steel Structure Shelves will innovate and promote shelf installation to quickly increase the shelf life. Installation of shelves is a technology. Lianhe Zhongbang has more than 15 people installed attic shelf team. Zhongshan heavy-duty shelves, Zhongshan attic shelves, and Zhongshan warehouse shelves are all assembled from beams, columns, and support beams.