release time：  2021-05-04Click volume:  80

To determine the specifications of a heavy-duty rack, whether it is the length or the width, it is relatively easy to obtain a single value and relatively easy to determine, but the beam specifications of the heavy-duty rack usually need to be determined by referring to the parameter table given by the manufacturer, but sometimes even I don’t know how to determine the parameter table, but how can I determine the required beam specifications? Let’s teach you.

  1. Heavy-duty rack beam specification parameter table display form

   The parameter table given by the manufacturer will have two types of beams, one-piece and welded. When you see the specification table, you must first determine which beam you want to use for the shelf. This can be determined by the load capacity. Both types of beams with a weight of less than four tons can be used. If the load capacity is more than four tons, only the brazed welding type can be used

   2. Heavy-duty rack beam specification parameter table specific data column

   There will be several data on the parameter table of the beam, one is the section specification of the beam, the other is the length of the beam, and the other is the bearing capacity of the beam. For the same section specification, different lengths can have different bearing capacities, among which the bearing capacity The requirements can be fixed, and the length of the beam can be calculated, so as long as the two determined data are available, the corresponding specifications can be found in the parameter table to determine the required beam specifications.

  3. Heavy-duty rack beam specification parameter table bearing capacity calculation

  The carrying capacity can be obtained by evaluating the weight of the usual cargo or the carrying capacity of the pallet used, while the length of the beam can be obtained by calculation. To calculate the length of the beam mainly depends on the data of the pallet, the specification of the pallet is set as a *b, a is the length of the pallet in the direction of the forklift storage operation, b is the width of the pallet, then the length of the beam is 2a+3*100, where 100 is the gap distance between the pallets and the columns on both sides, the unit is mm.