release time：  2021-07-02Click volume:  28

  In the past, the racks all needed electric welding, and there were no professionals, so they could not be installed at all, but now with the combined racks, they can be installed without any electric welding operation. The following editor will introduce how to install and install the combined racks. step:

How to install the combined shelf:

   Because the combined shelves are already produced in a modular manner, they probably consist of shelf columns, beams and laminates. These parts are all ingeniously designed when the shelf accessories are produced. Only these few The components can be combined, and even tool-less operation can be realized.

Combination shelf installation steps

  First step: installation of column and bottom beam

Set up a shelf column, insert two shelf beams at the bottom diamond-shaped hole (or butterfly hole) of the column, pay special attention to aligning the holes, and don't damage the bayonet.

 Step 2: Close another column and beam

 Continue to clamp the column on the other side, and insert the beam of the modular rack according to Step 1, thus forming a relatively stable structure.

The third step: installation of the upper beam

 Then install a layer of beams on the combined shelf, pay attention to how many layers there are, and install one layer by layer on the Internet, pay attention to alignment, after aligning the card holes, it will be stuck without any effort.

 The fourth step: install the shelf

       This step is already very simple, because the combined shelf is already a stable structure, but we recommend that you put the combined shelf in the correct position before installing the shelf. After the shelf is placed, it will be much easier to install the shelf. , After all, the shelves are heavy!

In short, the combined shelf is relatively easy to install. As long as you follow the above four installation steps, there is basically no problem.