release time：  2021-09-24Click volume:  79

   Heavy-duty racks are favored by people because of their high weight and strong impact resistance, especially for the management of large products. The warehouse area can be effectively used, the management efficiency of storage racks has been greatly improved, the storage area is effectively used, and the storage efficiency of storage racks has been improved, but in order to ensure better use effects and ensure the normal use of shelves, the design of heavy-duty racks must pay attention to the following A few things.

1. In order to make the slide smooth, if the slope is long, in order to avoid the tilting phenomenon caused by excessive impact when the pallet cargo falls to the bottom, it is necessary to add a buffer device or cargo divider at the lowest part of the slope. Therefore, the design, manufacture and installation are more difficult and costly, and the length of the slope should be moderate.

2. Add a damping device. The total depth of the shelf design should not be too large, otherwise there will be a large "dead corner" that cannot be used, which will affect the space utilization rate. The ramp is too long and the sliding controllability will be poor. And the impact of sliding will be relatively large. Barren, lumpy, palletized goods are likely to be overthrown.

　　 Third, the shelf should not be too high, reliability and operability are the most important. Under normal circumstances, the height of heavy-duty racks is generally designed to be about 6 meters, and the weight of a single piece of cargo is generally within 1000kg. If the height is too high and the weight of the single compartment is too heavy, its reliability and operability will be greatly reduced.

　　 In short, in order to ensure the safety and reliability of heavy-duty racks, in the future use, the design must master the above-mentioned principles. At the same time, in daily use, we must pay attention to maintaining dry and heavy shelves, so as to extend their service life and exert greater use value.