release time：  2022-04-19Click volume:  76

Warehouse shelves are usually custom-made according to the actual needs of customers, there is no large stock, and warehouse shelves are composed of multiple components, which need to be assembled on site. For enterprises, purchasing storage shelves is a big project, which involves preliminary design, mid-term supervision of the project and post-acceptance work. Among them, the pre-installation acceptance of storage shelves is also an important link. The following three main aspects will introduce the acceptance details of storage shelves.

        1. Check whether the columns and beams are bent or deformed

Columns and beams are two important components of storage shelves, and they are long and need to be transported to the site by logistics vehicles. If the packaging is not rigorous, bending deformation or surface damage is likely to occur, and you must pay attention to it when you accept it.

2. Check the surface weld for defects

The welding seam on the surface of the storage shelf is a test of the production capacity of the shelf manufacturer. It must be uniform, and there should be no defects such as cracks, slag inclusions, welding flashes, burn-through, arc craters and needle-shaped pores. It must be carefully observed during acceptance.

3. Check the surface coating quality

The surface of storage shelves is sprayed not only for beauty, but also for good protection. It is easy to see if the surface treatment is not good. Some can also be tapped lightly with a hammer to see if there is a phenomenon of falling off. Be careful not to use too much force. Acceptance of warehouse shelves is a critical step prior to installation.